.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Quickly and accurately trace parts, patterns, designs, plans, maps, graphs - anything
CNC, CAD, Apparel, Construction, woodworking, metal fabrication, glass, plastics, building, everybody
Trace an entire outline with the pen stylus or cursor in minutes. Trace, Save, Calculate.
Electronic devive that senses the location of the magnetic pen or cursor and sends accurate XY points to the computer.
When portability matters, flexible rollup tracing boards are also available. The rollup cursor is more accurate than the pen stylus.
- The standard accuracy of the electronic board is 0.01 in (0.254mm) which is adequate for most applications.
- A higher accuracy board with 0.005 in (0.127mm) is also available.
Trace an outline using the sharp tip of the pen stylus or using a cursor with magnifying glass and cross-hair.
Trace designs using freehand draw, lines, arcs, curves, points, circles, and shapes
Trace smooth curves with a series of points and when done the software will create a smooth curve through the points.
- Place the cell phone or ipad on the tracing board for easy access
Program the buttons on the cursor to be different software commands.
Change the software to meet your needs.
The electronic board is a grid of wires going up and down and across with a hard formica surface. The pen stylus or cursor generates a magnetic field that is "sensed" by the board. Push a button on the pen or cursor or push down on the tip of the pen and a stream of accurate XY points are sent to the computer. The Logic Trace software then displays these points as a drawing or numbers.
44x60 in (110x150 cm)
36x48 in (90x120 cm)
24x36 in (60x90 cm)
20x24 in (50x60 cm)
12x18 in (30x45 cm)
12x12 in (30x30 cm)
36x48 in (90x120 cm)
30x36 in (60x90 cm)
5x8 ft (1.5x2.4m)
5x12 ft (1.5x3.6m)
5x16 ft (1.5x4.8m)
8x11 ft (2.4x3.3m)
8x16 ft (2.4x4.8m)
8x22 ft (2.4x6.6m)
0.01" (0.254mm)
0.005" (0.127mm)
.
The boards are made in the USA, are in stock, and ready to ship anywhere in the world.
Connect multiple boards for tracing very large patterns. Connect two to eight boards together for tracing patterns anywhere from 5x8' to 8x24'
After assembling a Jumbo Tracer, the boards are calibrated by tracing several points across the boards.
Trace between boards, by defining alignment points, moving the pattern, realigning, and editing
Trace parts and patterns, save DXF vector files, and load files into any CNC or CAD software and hardware
Trace patterns and designs and save DXF-ASTM, DXF-AAMA, and PDF files for loading into apparel and graphic programs
Trace blueprints and plans and calculate areas, lengths, counts for the building and estimating industries
